PicoScope on network under W7

dsperate · Post by **dsperate** » Fri Nov 19, 2010 9:37 pm

I can connect PicoScopes on network through a USB to network adaptor under Windows XP. I tried with more than one adaptor (TRENDnet, UBox, ineo) and all of them worked. My problem is that my new laptop has W7 and I wasn’t able to get the same results. I know that the problem is not with the PicoScopes but I’d like to know if somebody found a solution to this problem.

Thanks,

ziko · Post by **ziko** » Mon Dec 06, 2010 3:59 pm

Hi,

Don't know if this will help, one of my colleagues has tried out belkin hub, which is a hard wired system but he plugged it into his wireless router, please see attached image, this was on a Windows 7 machine.

We have an article about using the Belkin router on a hard wired system but it should be no problem attaching to a wireless system:

http://www.picotech.com/support/kb/kbfi ... USBHub.pdf

Hope this helps.

Kind regards

Test & Measurement Forum

PicoScope on network under W7

PicoScope on network under W7

Re: PicoScope on network under W7