High Pulse Measurement errors

Post any questions you may have about our current range of oscilloscopes
Post Reply
UQM_user
Newbie
Posts: 0
Joined: Tue Nov 23, 2010 8:40 pm

High Pulse Measurement errors

Post by UQM_user »

Hi. My high pulse measurements are less than the pulse width on a 3204. I can measure the positive portion of the sine wave with cursors and it is always ~25% longer than the automatic measurement. Has anybody run into this?
Top
ziko
Advanced User
Advanced User
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots

Re: High Pulse Measurement errors

Post by ziko »

Hi and thank you for your post.

What is the frequency of the signal, what is your result and what are you expecting, could you send an example waveform. The more information you can provide the easier it will be to help.

Kind regards
Ziko

Technical Specialist
Top
Post Reply

Return to “USB PC Oscilloscopes”