ADC24 differential input

Post any questions you may have about our current range of USB data loggers
Post Reply
GavinB
Newbie
Posts: 0
Joined: Mon Jan 18, 2010 2:27 pm

ADC24 differential input

Post by GavinB »

Hi

When using the logger to meassure voltage differentials,in this case a small voltage drop over a resistor to calculate current,do I still have to use voltage dividers when the appllied voltage is 6v but difference is in mV across the resistor?

ie I've got channels 1 and 2 in differential mode, one chanel is at say,5.95v the other 6.00v. Is the ADC seeing 6v therfore divider need or 50mV, no divider required?

GavinB
Newbie
Posts: 0
Joined: Mon Jan 18, 2010 2:27 pm

Re: ADC24 differential input

Post by GavinB »

No need to reply, sorted! dividers used :D

Post Reply