ADC 216 DLL exception _ labview under NT system (NT,2000,XP)

Having problems ? let us know the details here
Post Reply
Guest

ADC 216 DLL exception _ labview under NT system (NT,2000,XP)

Post by Guest »

My card is adc 216.
I developed under Labview 6.1 an application (.exe) using adc20032.dll but the main program runs well under 98 (or Xp with 98 compatibility) but an error appears under NT system.

What should I do ?

ojoj23

Post by ojoj23 »

this error appears even if the ADC 216 isn't connected.

User avatar
markspencer
Site Admin
Site Admin
Posts: 598
Joined: Wed May 07, 2003 9:45 am

Post by markspencer »

Hi,

Please can you provide further details of the problem. The exception that occurs. Have you tried the Labview example that is provided by us. Does the same occur using this. If you take you Labview program and run it on XP (not compatibility mode) does the same error occur.

Have you tested The unit with Picoscope on your PC using the same driver?

Best regards,
Regards,

Mark Spencer

Post Reply