Exactly how are between-rulers RMS values calculated?
If rulers are placed close to a sine zero crossing, the RMS reads approximately the RMS of the entire sine wave, not the RMS between the rulers, which I suspect should be much less.
Could send me a copy of your settings file and an image of the waveform please? Alternatively you could attach your psdata file if it is not too large.
The RMS value 565.7 mv is correct for the entire waveform, and should be less between cursors because the waveform between cursors is never more tha 400 mv.
Hi ziko,
Thanks for checking this out. The problem also occurs (at least in simulator mode) with the 2000 and 5000 series also.
Would you please contact me when the problem is resolved?
Thanks!