PicoScope 7 Software
Available on Windows, Mac and Linux
ADC-216 in Windows 7
-
JAMES YUNG
ADC-216 in Windows 7
Hi,
I bought a new computer with Windows 7 as the operating system.
Will my ADC-216 with Parallel port to USB convertor works? Which software should I download?
I bought a new computer with Windows 7 as the operating system.
Will my ADC-216 with Parallel port to USB convertor works? Which software should I download?
-
Pico Stuart
- Site Admin
- Posts: 78
- Joined: Tue Jun 30, 2009 3:08 pm
Re: ADC-216 in Windows 7
Hi James,
Thankyou for your inquiry with regard to your ADC 216 application.
Please proceed to the following link and download PicoScope R5.21.1 from the following link. The installation program will install both PicoScope and PicoLog (if you just want one of these programs, select custom installation when prompted).
http://www.picotech.com/software.html
Please note: parallel port products and the USB ADC-11 do not support 64-bit operation.
If you encounter any difficulties please do not hesitate to contact me.
Kindest regards,
Stuart
Technical Specialist
Thankyou for your inquiry with regard to your ADC 216 application.
Please proceed to the following link and download PicoScope R5.21.1 from the following link. The installation program will install both PicoScope and PicoLog (if you just want one of these programs, select custom installation when prompted).
http://www.picotech.com/software.html
Please note: parallel port products and the USB ADC-11 do not support 64-bit operation.
If you encounter any difficulties please do not hesitate to contact me.
Kindest regards,
Stuart
Technical Specialist