PicoScope 7 Software
Available on Windows, Mac and Linux
startup settings
-
richy
startup settings
4224...Re start up setting; esp in FFT mode: I notice there is only one load/start spectrum setting available on boot up. Is this correct ? I think this applies to all Pico 6 software in general.
I would love more options to be able to start up and load different scalings.
richwalters
I would love more options to be able to start up and load different scalings.
richwalters
Re: startup settings
Hi,
There is only one "Default" start-up setting but you can have many different settings saved as "Settings" files (.pssettings). These can be double-clicked to start-up PicoScope6 in that mode.
Just set-up as you wish and go to "Save Current Waveform as" then select "Settings Files (.pssettings)".
Regards,
PeterF.
There is only one "Default" start-up setting but you can have many different settings saved as "Settings" files (.pssettings). These can be double-clicked to start-up PicoScope6 in that mode.
Just set-up as you wish and go to "Save Current Waveform as" then select "Settings Files (.pssettings)".
Regards,
PeterF.