Need low sample rates

Post any questions you may have about our current range of oscilloscopes
Post Reply
Markus Hubig

Need low sample rates

Post by Markus Hubig »

Hi we have a Pico 4224 Oscilloscope and we try to capture data for later use, but even if we put the datadiplaying of Picoscope at the lowest level weg get aprox. 1600 measures/second.

Is there a way to export only about 10-20 measures/seconds?

Thank you, Markus

peaceman

Re: Need low sample rates

Post by peaceman »

Hallo

For a low sample rate is the PicoLog software the best choice.
The program is a bit older but you can take samples at very low rates.

Post Reply