connect 2 computer have Labview software on the network

Post your LabVIEW discussions here
Post Reply
vienthong
Newbie
Posts: 0
Joined: Sat Mar 13, 2010 2:20 pm

connect 2 computer have Labview software on the network

Post by vienthong »

Hi,i have a computer use picoscope 2104 to measure with the VI ps2000.vi, but i want to control or save data on another computer (have Labview software) on the network. Can u help me! thank so much!

Robin
Advanced User
Advanced User
Posts: 558
Joined: Fri Sep 19, 2008 10:17 am

Re: connect 2 computer have Labview software on the network

Post by Robin »

Hi

I believe this is possible if you have Labview on both machines.

This is really a question about Labview, so you would be better off consulting the documentation or NI.

Robin

vienthong
Newbie
Posts: 0
Joined: Sat Mar 13, 2010 2:20 pm

Re: connect 2 computer have Labview software on the network

Post by vienthong »

thank u! so can u help me? do u have any document about this topic! thank u so much!

christianbaker
Newbie
Posts: 0
Joined: Mon Apr 19, 2010 12:27 pm
Location: London, UK

Re: connect 2 computer have Labview software on the network

Post by christianbaker »

I think this is what you need

http://zone.ni.com/devzone/cda/tut/p/id/2710

but, as Robin said, you'll be much better off posting further queries about it in the national instruments labview forums here

http://forums.ni.com/ni/board?board.id=170

since your problem really has nothing to do with your picoscope

Post Reply