PicoScope 7 Software
Available on Windows, Mac and Linux
use the picoscope 2104 to measure
use the picoscope 2104 to measure
with the VI ps2000.vi, i use the picoscope 2104 to measure the signal, but i don't know the frequency of the signal,can u help me! thank u !
- Attachments
-
- chart.doc
- (112.5 KiB) Downloaded 414 times
-
christianbaker
- Newbie
- Posts: 0
- Joined: Mon Apr 19, 2010 12:27 pm
- Location: London, UK
Re: use the picoscope 2104 to measure
Hi,
You need to pass your aquired waveform through LabVIEW's 'Extract Single Tone Information' VI, which finds the frequency of the componant of your signal with the highest amplitude.
It's in Signal Processing> Waveform Measurements
Or, if your signal is more complex (it doens't look like it from your attachment) you'll need to do proper freqeuncy analysis with the LabVIEW octave analysis objects or FFT objects.
Christian.
You need to pass your aquired waveform through LabVIEW's 'Extract Single Tone Information' VI, which finds the frequency of the componant of your signal with the highest amplitude.
It's in Signal Processing> Waveform Measurements
Or, if your signal is more complex (it doens't look like it from your attachment) you'll need to do proper freqeuncy analysis with the LabVIEW octave analysis objects or FFT objects.
Christian.