PicoScope 7 Software
Available on Windows, Mac and Linux
Serial Synchronised Auto Measurement
-
Guest
Serial Synchronised Auto Measurement
Hi,
I have a requirement to perform automated, repeated tests for a stereo pair of audio signal channels in a production pass/fail test. Ideally this would include a distortion measurement. The DUT can be controlled through a serial bus. I would like to know if its possible to use a Picoscope hardware/software solution to automatically run multiple parameter tests synched with the DUT via a PC. I have access to a software programmer who can write the routine. Can you advise if this is possible?
Many thanks, Simon
I have a requirement to perform automated, repeated tests for a stereo pair of audio signal channels in a production pass/fail test. Ideally this would include a distortion measurement. The DUT can be controlled through a serial bus. I would like to know if its possible to use a Picoscope hardware/software solution to automatically run multiple parameter tests synched with the DUT via a PC. I have access to a software programmer who can write the routine. Can you advise if this is possible?
Many thanks, Simon
Re: Serial Synchronised Auto Measurement
Hi,
Our scopes can either be controlled:-
Manually using the PicoScope6 GUI, with all the facilities provided for you
or:-
Using your own application, written with the aid of our "Software Development Kit" where you will need to do all your own signal processing to obtain measurements.
PicoScope6 cannot be controlled by an external program.
Regards,
PeterF.
Our scopes can either be controlled:-
Manually using the PicoScope6 GUI, with all the facilities provided for you
or:-
Using your own application, written with the aid of our "Software Development Kit" where you will need to do all your own signal processing to obtain measurements.
PicoScope6 cannot be controlled by an external program.
Regards,
PeterF.