Measurements table empty/not updated in PicoScope 6

Post any questions you may have about our current range of oscilloscopes
Post Reply
Edgar
Newbie
Posts: 0
Joined: Tue Mar 09, 2010 7:08 am

Measurements table empty/not updated in PicoScope 6

Post by Edgar »

Hardware: PicoScope 4424
SW: PicoScope® 6 - PC Oscilloscope software version: 6.2.14.0

I have added two measurements on channel A: AC RMS and DC Average with the span Whole Trace. The fields for Min, Max, Average, Std and Capture Count are all empty. The field Value says "Not eneough data".

The signal on channel A is a sinewave with frequency 50Hz and amplitude +/- 2.5V.

The settings are: Collection time 10ms/div, Number of samples 1MS, Input range +/-5V, Trigger mode Auto.

Maximum Waveforms are set to 32 and Statiscs Captures are set to 20 (both are the default values)

Why is no measurements values shown????

PeterF
Advanced User
Advanced User
Posts: 435
Joined: Thu Jun 07, 2007 10:53 am
Location: Cambridgeshire

Re: Measurements table empty/not updated in PicoScope 6

Post by PeterF »

Hi,
Please upgrade to version R6.3.43:-
http://www.picotech.com/software.html
Your software is quite out of date.
Regards,
PeterF.

Post Reply