Converter Fail

Post Reply
Alistair

Converter Fail

Post by Alistair »

I have been using the EL005 Enviromon data logger with an EL040 current monitor though it isn't logging any data and giving the message 'Converter fail' in the events window. I have been using a standard cable instead of the EnviroMon network cable, is this likely to be a problem?

Any help would be appreciated

PeterF
Advanced User
Advanced User
Posts: 435
Joined: Thu Jun 07, 2007 10:53 am
Location: Cambridgeshire

Re: Converter Fail

Post by PeterF »

An incorrect cable can certainly be a problem. The connector for the network cable has space for six pins but only the centre four are used. They are wired directly, pin to pin, with no cross-over.
Regards,
PeterF.

Post Reply