ADC16 Trigger setup

Post any questions about our serial port products
Post Reply
tmcdonagh

ADC16 Trigger setup

Post by tmcdonagh »

I would like to set up a trigger event with my ADC16 to collect data for a specified period of time. After the collection period, I would like for the unit to recycle, increment the filename, and wait for another trigger event before collecting data. Is it possible to use the ADC16 to accept a trigger event such as a contact closure?

Thanks,

Tom

User avatar
markspencer
Site Admin
Site Admin
Posts: 598
Joined: Wed May 07, 2003 9:45 am

Post by markspencer »

Hi,

The ADC-16, is not capable of using triggers as its sample rate is only 1.5Hz, therefore it cannot be used in 'Fast Block' mode which is required for the trigger to be set.

Best regards,
Regards,

Mark Spencer

Post Reply