2204 Oscope

tomroth · Post by **tomroth** » Sat Oct 24, 2009 2:48 am

The spec say it can handle +/-20V. Is that Vrms, Vp, or Vpp?

Thanks!!!

Robin · Post by **Robin** » Tue Oct 27, 2009 9:07 am

Hi

It is the instantaneous voltage. If your signal exceeds this it will be clipped at either +20 V or -20 V.

You can use x10 probes if you need to measure higher voltages.

Robin

Ceres · Post by **Ceres** » Fri Feb 05, 2010 3:16 pm

Hi Robin,
Based on what you are saying, scope 2204 with voltage probe set to x10 is it possible to measure voltage up to 200V?

Thanks
Mauro

Robin · Post by **Robin** » Mon Feb 08, 2010 4:47 pm

That's correct. However, these probes are NOT suitable for measuring mains. See the following page for our isolated differential probes:

http://accessories.picotech.com/active- ... robes.html

Robin

Test & Measurement Forum

2204 Oscope

2204 Oscope

Re: 2204 Oscope

Re: 2204 Oscope

Re: 2204 Oscope