I want to monitor Temp vs Time from 4 thermocouples. Is there any way I can start collecting data individually from each on a PC and display on a 4 way split screen.
I want to input from 4 thermocouples to one PC with the interface software allowing the PC to have a 4 way split screen. Each segment of the screen to show data from each thermocouple and each screen to be started independently i.e. can be started at differnt times.
Unfortunately, this is not possible with our software as you would need to stop collection to change the set up and enable/disable channels. If you were to write your own software or use LabVIEW, this could be done.
PicoLog will plot the temperature vs. time of all enabled channels on the same axes.
Do you really need to start/stop the channels independently?