Custom probe troubles

Forum for discussing PicoScope version 6 (non-automotive version)
Post Reply
hbraasch
User
User
Posts: 2
Joined: Tue Jul 07, 2009 12:22 pm
Location: Cape Town

Custom probe troubles

Post by hbraasch »

I am having trouble with the most basic aspect of custom probes. I am even having trouble getting the "built-in" probes to work as expected. Using PicoScope 6.2.2.12 in demo mode, by selecting different "built-in" probes I expect the display output to change. I see no differenves after the change. Is this a finger trouble issue, my misconception or a bug?

Assistance of any sort shall be much appreciated.

Thanks a lot.

hbraasch
User
User
Posts: 2
Joined: Tue Jul 07, 2009 12:22 pm
Location: Cape Town

Problem resolved!

Post by hbraasch »

Problem resolved and I am a bit embarrassed! I changed the probe on channel B, while looking at the data from channel A. Did not notice there were two similar icons on the toolbar.

Regards and thanks.

Robin
Advanced User
Advanced User
Posts: 558
Joined: Fri Sep 19, 2008 10:17 am

Post by Robin »

Hi

I'm glad you solved your problem! As you have discovered, different probes can be selected for each channel and you will get a channel options button for each channel on your device.

Robin

Post Reply