DeepMeasure Tool

mmdb · Post by **mmdb** » Tue Aug 21, 2018 10:07 am

Hi,
I am currently working on my University Dissertation and I am having a problem with the Deep Measure tool. I set up the Cycle threshold and Hysteresis to cover the area between the time rulers that I want to measure but no data values are given/recorded.

Please could anyone help me to understand where im going wrong.

Regards
Daniel

Post by **Martyn** » Tue Aug 21, 2018 10:18 am

Cycle Threshold should be set to half way between the max and min of your waveform, and the threshold should be set at around 10% of the pk-pk value.

If you post a data file then we can look at your setup.

mmdb · Post by **mmdb** » Tue Aug 21, 2018 11:54 am

Hi Martyn,

The file is too large to send, even when zipped (I used quite a lot of samples), do you have a onedrive/email I can share the document to?

Regards
Daniel

Post by **Martyn** » Tue Aug 21, 2018 11:59 am

You can use support@picotech.com although if the file is large you may need to put on a file share and send a link.

mmdb · Post by **mmdb** » Tue Aug 21, 2018 12:17 pm

I have sent a file location link to support@picotech.com

Test & Measurement Forum

DeepMeasure Tool

DeepMeasure Tool

Re: DeepMeasure Tool

Re: DeepMeasure Tool

Re: DeepMeasure Tool

Re: DeepMeasure Tool