pico2208 doesn't work tektronix tpp0200

Post any questions you may have about our current range of oscilloscopes
Post Reply
berker
Newbie
Posts: 0
Joined: Wed Jul 18, 2018 2:43 pm

pico2208 doesn't work tektronix tpp0200

Post by berker »

Hi,

I have tektronix tpp 0200 probes. I want to use these with pico2208 scope.
But,voltage reading on GUI too small than real voltage value.
For example 3V voltage, 0.1-0.2V seen on gui.
How can i use these probe with this scope?

specs of probes
200MHz
10Mohm/12pF
10X
300V CAT2

Martyn
Site Admin
Site Admin
Posts: 4491
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: pico2208 doesn't work tektronix tpp0200

Post by Martyn »

Can you post a psdata file showing the issue, and have you selected x10 in the probe drop down.
Martyn
Technical Support Manager

berker
Newbie
Posts: 0
Joined: Wed Jul 18, 2018 2:43 pm

Re: pico2208 doesn't work tektronix tpp0200

Post by berker »

Sorry,
for late reply. How can i export psdata? I attached a photo that explain current my problem.
Attachments
pico_foto.png

berker
Newbie
Posts: 0
Joined: Wed Jul 18, 2018 2:43 pm

Re: pico2208 doesn't work tektronix tpp0200

Post by berker »

Hi,

I found psdata and attached it.
In the previous image, signal and ground was short on out and in probes to test 1Vpp. But i acquire only 0.1V.
"have you selected x10 in the probe drop down"
Dou you mean custom probes menu and x10? If yes, i select it.

Best Regards
Attachments
20180721-0001.psdata
(243.4 KiB) Downloaded 286 times

berker
Newbie
Posts: 0
Joined: Wed Jul 18, 2018 2:43 pm

Re: pico2208 doesn't work tektronix tpp0200

Post by berker »

I found the solution now.

I misundertstand probe selection menu, right place was channel e.g. A menu,not custom probes.
Channel drop-down menu, i select x10 and the problem was fixed.

Thanks.

Martyn
Site Admin
Site Admin
Posts: 4491
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: pico2208 doesn't work tektronix tpp0200

Post by Martyn »

That's good to hear.
Martyn
Technical Support Manager

Post Reply