LowPass.Enable.Checked

Forum for discussing PicoScope version 6 (non-automotive version)
Post Reply
Joerg
Newbie
Posts: 0
Joined: Tue Mar 13, 2018 3:37 pm

LowPass.Enable.Checked

Post by Joerg »

Hi,
the Automation command Channel.#0.LowPass.Enable.Checked=True
does not work reliable. Sometimes you have to repeat the macro.
If you store a setting lowpass filter as startsetting and load it again,
the lowpass filter is unchecked. I'm using a Picoscope 3406D.
What could I do to improve that ?
Thanks

Martyn
Site Admin
Site Admin
Posts: 4491
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: LowPass.Enable.Checked

Post by Martyn »

Can you send in your code and start up settings to support@picotech.com This may be a sequencing issue so we need to see the flow to be able to work out why there is an issue.
Martyn
Technical Support Manager

Martyn
Site Admin
Site Admin
Posts: 4491
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: LowPass.Enable.Checked

Post by Martyn »

We have received the files and replicated both issues so will raise a bug for these with the development team. I have tried for workarounds but haven't been successful yet. The filters are active if the file is loaded without a scope attached so this is likely to be a sequencing issue.
Martyn
Technical Support Manager

Joerg
Newbie
Posts: 0
Joined: Tue Mar 13, 2018 3:37 pm

Re: LowPass.Enable.Checked

Post by Joerg »

Hi Martyn,

how much time will it take until we get a solution or workaround for this bug ?

Martyn
Site Admin
Site Admin
Posts: 4491
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: LowPass.Enable.Checked

Post by Martyn »

Unfortunately I have no news on timescales :(
Martyn
Technical Support Manager

Post Reply