ADC11

Having problems ? let us know the details here
Post Reply
Guest

ADC11

Post by Guest »

DEAR FRIENDS,

I have bought ADC11 from pico technologies long back. now the picosoft software disket is missing . so i cannot use it . if anybody is having softwares comaptible for ADC 11 please inform me. whether it can download from anywhere?
thanks in advance

Robin
Advanced User
Advanced User
Posts: 558
Joined: Fri Sep 19, 2008 10:17 am

Post by Robin »

Hello

All of Pico's software is freely downloadable from http://www.picotech.com/download.html

Robin

Guest

picolog

Post by Guest »

sir,

thanks for your reply .I have downloaded pico log and tried to acqiure data through lpt1 . it shows a constant reading 2.5 v throghout the run . my sensors out put is 1 v only . what might be the reason? please help me

Robin
Advanced User
Advanced User
Posts: 558
Joined: Fri Sep 19, 2008 10:17 am

Post by Robin »

Without seeing your circuit, it is difficult to say. If possible, try connecting a low voltage (<2.5 V) supply and see if you get the correct reading.

Robin

Guest

Post by Guest »

Sir,

i have connected a 1 v dc supply to one of the channels of ADC11 and started recording. it shows 2.5v always. is it due to any hardware problem?

Robin
Advanced User
Advanced User
Posts: 558
Joined: Fri Sep 19, 2008 10:17 am

Post by Robin »

Do you get the same on all channels?

Robin

Guest

Post by Guest »

sir,

yes all channel bevaves similar.

Guest

Post by Guest »

sir,

one more thing i noticed is without any input supply also it shows 2.5 volt..
please help me to resolve this issue

ajesh

Guest

Post by Guest »

sir,

i have succeeded .. thanks for ur advice. i need a small favor from u

Guest

Post by Guest »

how to import the spred sheet data from excel?

Robin
Advanced User
Advanced User
Posts: 558
Joined: Fri Sep 19, 2008 10:17 am

Post by Robin »

Hi

It is not possible to import data to PicoLog.

It is possible to export data to Excel. You can save data as a CSV file that can be opened by Excel. You can copy and paste or use DDE.

I hope this helps

Robin

Guest

thanks

Post by Guest »

ya . i did it. i have copied the data to excel. thanks for ur advice. one morething , i would like to buy one more ADC card for 4-20 ma . which card is best for this purpose?
thanks in advance

Robin
Advanced User
Advanced User
Posts: 558
Joined: Fri Sep 19, 2008 10:17 am

Post by Robin »

You can use your ADC11 with a 120 Ohm shunt resistor for measuring 4-20 mA signals.

Robin

Post Reply