SOLT-STD-M CAL KIT FILE FORMAT OF .KIT FILE

Discussions forum for our Sampling Oscilloscopes, VNA, and Pulse Generators
Post Reply
rgarnett
Newbie
Posts: 0
Joined: Sun Jul 01, 2018 3:42 am

SOLT-STD-M CAL KIT FILE FORMAT OF .KIT FILE

Post by rgarnett »

Hi,

I have a Tektronix TTR506A VNA (sorry about that). I recently purchased the above Cal kit, but I cannot interpret the SM000054.kit file. The Tek software uses touchstone s1P files for the cal data import. What are the various sections of the file and could I convert these to their touchstone equivalent?

Best regards

Rob

Martyn
Site Admin
Site Admin
Posts: 4491
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: SOLT-STD-M CAL KIT FILE FORMAT OF .KIT FILE

Post by Martyn »

Can you please email support@picotech.com to discuss this
Martyn
Technical Support Manager

NeilH
PICO STAFF
PICO STAFF
Posts: 265
Joined: Tue Jul 18, 2017 8:28 am

Re: SOLT-STD-M CAL KIT FILE FORMAT OF .KIT FILE

Post by NeilH »

Hi habet222

would you be able to email support@picotech.com to discuss this
Neil
Technical Support Engineer

AlexZ
Newbie
Posts: 0
Joined: Thu Mar 21, 2019 8:42 am

Re: SOLT-STD-M CAL KIT FILE FORMAT OF .KIT FILE

Post by AlexZ »

Hello,

I have the SOLD-STD-F VNA calibration kit. The package contains besides the cal kit an USB Storage with a “SF 000270.kit” file.
Can anyone explain the file structure?
I’m using a Rohde & Schwarz VNA. How can I use the file with my VNA?


Already maild to support@picotech.com, but didn't get response.

Greetings
Alex

Martyn
Site Admin
Site Admin
Posts: 4491
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: SOLT-STD-M CAL KIT FILE FORMAT OF .KIT FILE

Post by Martyn »

You should have received an email with the requested information.
Martyn
Technical Support Manager

mar
Newbie
Posts: 0
Joined: Wed May 03, 2023 7:09 am

Re: SOLT-STD-M CAL KIT FILE FORMAT OF .KIT FILE

Post by mar »

Hi Martyn,

the same question, here! Would you please sent me the calibration data set for use of my SOLT-STD-F
(part number A30N30-65-6G60, WO222105030063) with a Rohde&Schwarz VNA.

Thank you very much
Utz

Martyn
Site Admin
Site Admin
Posts: 4491
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: SOLT-STD-M CAL KIT FILE FORMAT OF .KIT FILE

Post by Martyn »

Please contact support@picotech.com for this information
Martyn
Technical Support Manager

Post Reply