5.20.1 triggering

Forum for discussing PicoScope (version 5)
Post Reply
jswanson
Active User
Active User
Posts: 14
Joined: Wed Apr 05, 2006 8:07 pm

5.20.1 triggering

Post by jswanson »

Hi,
I'm using an adc212/50 on LPT1 and 5.20.1
with the timebase set to <=2ms/trace the trigger works fine. Larger than this the trigger point is offset from the trigger marker and some of the trace is not shown. If the offset is 0% it triggers correctly, but gets worse as the offset is increased (-%). I have tried un-installing and re-installing. Any ideas?
Attachments
2008_09_09_002-2.jpg
2ms/trace
(59.05 KiB) Downloaded 67 times
2008_09_09_002.jpg
5ms/trace
(56.05 KiB) Downloaded 69 times

jswanson
Active User
Active User
Posts: 14
Joined: Wed Apr 05, 2006 8:07 pm

Post by jswanson »

Uninstalling everything then reinstalling fixed the problem. The software still won't install on my Dell BTW (see my previous thread). I have to choose PICOSCOPE 3000. Everything else fails.

Post Reply