input BW-limit filter accessories

Post discussions on projects you are working on
Post Reply
packo
User
User
Posts: 6
Joined: Wed Aug 09, 2017 9:59 pm

input BW-limit filter accessories

Post by packo »

Hello,

Could you recommend any (feed-through?) filters (e.g. 200KHz or 1MHz) for limiting the bandwidth at the oscilloscope input?

They would be very useful for further increasing the ENOB (by decreasing the noise) in 2000 series (2206B) and also 5000 (5242D) series oscilloscopes when sampling low frequency e.g. audio signals.

Also could you please offer hints on what other accessories I would need for matching the oscilloscope probes to the filter and the filter to the oscilloscope ? (e.g. PROBE -> BW limit filter -> feed-through 50Ohm terminator? -> OSCILLOSCOPE IN(HighZ)).

Thank you!

Martyn
Site Admin
Site Admin
Posts: 4491
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: input BW-limit filter accessories

Post by Martyn »

If you can email support@picotech.com regarding the questions you are asking across different topics we will be able to give you a full answer to enable you to make an informed choice on scope and accessories.
Martyn
Technical Support Manager

Post Reply