PicoScope 9000 database file save

Forum for discussing PicoScope version 6 (non-automotive version)
Post Reply
SKFA
Newbie
Posts: 0
Joined: Mon May 21, 2018 12:19 pm

PicoScope 9000 database file save

Post by SKFA » Mon May 21, 2018 12:24 pm

Hi,
I'm going to save the data on my display in infinite persistence mode, but when I click on "Disk.." button in Save/Recall menu, there is no field to choose the File Type and I can not choose database file. What's wrong? :?:
Tnx

TimB
PICO STAFF
PICO STAFF
Posts: 12
Joined: Tue Jun 04, 2013 12:07 pm

Re: PicoScope 9000 database file save

Post by TimB » Mon May 21, 2018 2:49 pm

Can you please advise which model of PicoScope you are using and also the software version running please?
Tim

SKFA
Newbie
Posts: 0
Joined: Mon May 21, 2018 12:19 pm

Re: PicoScope 9000 database file save

Post by SKFA » Tue May 22, 2018 10:37 am

TimB wrote:Can you please advise which model of PicoScope you are using and also the software version running please?
Thank you;
I use PicoScope 9211A , and the software version is 2.4.9.3. I hope it helps.

TimB
PICO STAFF
PICO STAFF
Posts: 12
Joined: Tue Jun 04, 2013 12:07 pm

Re: PicoScope 9000 database file save

Post by TimB » Wed May 23, 2018 8:22 am

I am running Win10 with latest updates and the current software release for the 9200 (2.6.0) which you can obtain from our downloads page on this website. You will find the download under the discontinued products tab.
All seems to be working well with a selection of File Types available in the dropdown box.
Please try the current release to see if this resolves the problem.
Tim

SKFA
Newbie
Posts: 0
Joined: Mon May 21, 2018 12:19 pm

Re: PicoScope 9000 database file save

Post by SKFA » Wed May 23, 2018 11:10 am

Thanks for your support,
I downloaded the mentioned version, but still, I see the menu similar to the attached image.
Attachments
Capture.JPG

TimB
PICO STAFF
PICO STAFF
Posts: 12
Joined: Tue Jun 04, 2013 12:07 pm

Re: PicoScope 9000 database file save

Post by TimB » Wed May 30, 2018 1:01 pm

]Please see screenshot.
I have the Display Menu on the right and have selected Infin Persistence
On the left I have the Save / Recall and have selected Ch1 as Source and then clicked on Save which has brought up the Save Waveform As box where you can save in the displayed formats as shown.

[attachment=0]Capture.JPG[/attachment
Attachments
Capture.JPG
Tim

SKFA
Newbie
Posts: 0
Joined: Mon May 21, 2018 12:19 pm

Re: PicoScope 9000 database file save

Post by SKFA » Thu May 31, 2018 3:35 pm

Thank you so much,
But as I see in Demo right now, it saves the last waveform, not the database .cgs file (explained in datasheet).
Anyway, I saved my data from acquisition menu>>Run until>>Acquisition
and setting # of acquisition and checking save all wfms.
It would be better if I could save the data in "one" file as a matrix. Of course, I made it using MATLAB by further processes.
Best Regards.

TimB
PICO STAFF
PICO STAFF
Posts: 12
Joined: Tue Jun 04, 2013 12:07 pm

Re: PicoScope 9000 database file save

Post by TimB » Mon Jun 04, 2018 9:00 am

Thanks for the update.
I will make our 9000 Series Product Manager aware of your comments and if we have any changes to the software will post an update for you.
Tim

SKFA
Newbie
Posts: 0
Joined: Mon May 21, 2018 12:19 pm

Re: PicoScope 9000 database file save

Post by SKFA » Mon Jun 04, 2018 8:52 pm

I really appreciate your support.

Post Reply