PicoScope 5.20.1 ADC-11 USB can not start twice

Forum for discussing PicoScope (version 5)
Post Reply
Langevad
User
User
Posts: 4
Joined: Fri Jul 18, 2008 3:16 pm
Location: Denmark Helsinge

PicoScope 5.20.1 ADC-11 USB can not start twice

Post by Langevad »

PicoScope 5.20.1 - and my own written program as well -
can not start twice, on an ADC-11 USB.

I have to disconnect the USB cable in order to start PicopScope,
or my own program again, or restart the PC.
Both "fixes" are NOT acceptable.

In PicoScope the "Time-line" in the bottom of the program window/form,
runs to the very/right end, and then keeps waiting, until
I unlplug the USB cable.
A restart after this, makes the program run.

Seems to be a Pico-driver/USB related issue.

As this issue can be shown, using Picoscope alone, it must be a
Pico Technology issue.

Running on an XP SP2 32 bit pc.

My application can not be invoiced to my customer,
with this bad behavior :(

ziko
Advanced User
Advanced User
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots

Post by ziko »

Hi Langevad,

We have managed to recreate your problem and have reported it as a bug report. In the meantime please uninstall the software and install 5.16.2.

Kind regards
Ziko

Technical Specialist

Post Reply