Display DC Average value between courser

Post any questions you may have about our current range of oscilloscopes
Post Reply
Manfred
Newbie
Posts: 0
Joined: Wed Mar 21, 2018 8:53 am

Display DC Average value between courser

Post by Manfred »

Hello,

I like to measure the DC Average value between two coursers. It displays only ---. What I am doing wrong? To add the psdata seems not possible.
Screen shot
Screen shot
Best regards

Manfred

Martyn
Site Admin
Site Admin
Posts: 4491
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Display DC Average value between courser

Post by Martyn »

You need to use two cursors with the white square box dragged in from the bottom left. The green circle cursors at the bottom right are Phase rulers, and used for a different purpose.
Martyn
Technical Support Manager

Post Reply