Synchronising PICO with Motion Capture System

erica · Post by **erica** » Thu Jul 31, 2003 1:27 pm

Hi

Is it possible to configure my ADC11 so that when I start recording data a trigger ( e.g. DO) is sent to my Motion Capture System to start data collection? The motion capture system can be triggered by a change in digital input. The DO doesn't change when recording is started.

thanx

markspencer · Post by **markspencer** » Thu Jul 31, 2003 1:46 pm

Hi,

Unfortunately, this is not possible to do in Picolog. However, you might be able to do it if you wrote your own software. The drivers and examples are available to download from here.

Best regards,