PicoScope 3406D not recognised by software

Post any questions you may have about our current range of oscilloscopes
Post Reply
Tiffas
Newbie
Posts: 0
Joined: Thu Feb 15, 2018 10:07 am

PicoScope 3406D not recognised by software

Post by Tiffas »

Hi,

When I plug the Picoscope it is recognised by windows as its name appears in the device manager. But right after I lunch the picoscope 6 software, its name disappear from the device manager and the software tells me that no device was found. Has anyone already had this kind of issue ?
Thanks in advance.

Loïc

Gerry
PICO STAFF
PICO STAFF
Posts: 1145
Joined: Mon Aug 11, 2014 11:14 am

Re: PicoScope 3406D not recognised by software

Post by Gerry »

Hi Tiffas,

Could you recreate the problem, close PicoScope 6, and then email a trace.xml file to us at support@picotech.com (the trace.xml canbe found in \Users\\AppData\Local\Pico Technology\64XXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX and the last trace file will be the one without any numerical suffix).

Regards,

Gerry
Gerry
Technical Specialist

Post Reply