Test and Measurement Forum

Cannot make picoscope 4262 to use both channels to acquire d

Post your LabVIEW discussions here

Cannot make picoscope 4262 to use both channels to acquire d

Postby kpckpc » Thu Feb 08, 2018 11:02 pm

Hi,
I am unable to make picoscope 4262 to use both channels to acquire data using labview. I started with the streaming capture example (PicoScope4000ExampleStreaming_64.vi) and modify it (adding/modify PicoScope4000Settings.vi and PicoScope4000AdvancedTriggerSettings.vi) to capture data on both channels with external trigger. The external trigger works. However, I cannot make channel B to work. Even when I try to use only channel B, it still does not work. I tested the 4262 with picoscope 6 software and both channels work fine. I have checked the program many time and cannot see what could be the problem.
kpckpc
Newbie
 
Posts: 1
Joined: Fri Feb 02, 2018 10:36 pm

Re: Cannot make picoscope 4262 to use both channels to acqui

Postby Martyn » Fri Feb 09, 2018 8:41 am

If you email support@picotech.com one of the LabVIEW team will take a look at this for you.
Martyn
Technical Support Manager
Martyn
Site Admin
Site Admin
 
Posts: 3005
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots


Return to LabVIEW

Who is online

Users browsing this forum: No registered users and 0 guests