Driver

Forum for discussing PicoScope (version 5)
Post Reply
Guest

Driver

Post by Guest »

I have an ADC-212 and want to use its driver to gather data for my own program. Can that be done? (By the way, I can't log on and can't find a way to get help with logging on without first logging on.)

picojohn
Advanced User
Advanced User
Posts: 382
Joined: Mon Jun 11, 2007 1:10 pm

Post by picojohn »

Hello Guest,

If you wish to write your own application software, you may refer to the programming examples provided as follows:

During software installation when prompted for 'setup type' select 'Custom' and ensure that 'programming examples' are installed by removing the red cross. The example programmes will be installed on the root drive in the following directory: C:/Program Files/Pico Technology/Pico Full/Examples

You will also find programming support for various languages in the user manual (http://www.picotech.com/document/pdf/adc2xx.pdf), along with an explanation of the API routines for the unit.

Regards
John

Guest

Driver

Post by Guest »

I did that but there are no programming examples for the ADC212. There are for the ADC200--are those applicable to any ADC2xx?

picojohn
Advanced User
Advanced User
Posts: 382
Joined: Mon Jun 11, 2007 1:10 pm

Post by picojohn »

Hello Guest,

Those are applicable to any ADC2xx

Regards
John

Post Reply