Test and Measurement Forum

New PicoLog 6.0.14 Beta for testing

Forum for discussing PicoLog

New PicoLog 6.0.14 Beta for testing

Postby Kieran » Thu Jan 25, 2018 4:28 pm

To all PicoLog data logger users!

We launched our latest Beta version of PicoLog 6 with full support for all Pico Technology data loggers.
In version 6.0.14 Beta, we are preparing for the launch of the full stable release in the very near future. Please find below the new features and enhancements for testing:

- Added full support for DrDAQ, PicoLog 1000, ADC-20/24 devices
- Enabled digital inputs for supported devices
- Enabled use of switching digital outputs from alarms
- Improved interface for math channels, scaling and alarms
- Improved user interface for zooming and autoscale

The new version of PicoLog 6.0.14 Beta is available from our normal downloads page now. Your feedback is greatly appreciated.

https://www.picotech.com/downloads

Happy testing!

Kieran Winstanley
Product Manager
Kieran
Pico Technical Support
Forum Moderator
Kieran
PICO STAFF
PICO STAFF
 
Posts: 31
Joined: Thu Jan 20, 2005 11:43 am
Location: St Neots, Cambridgeshire, UK

Re: New PicoLog 6.0.14 Beta for testing

Postby jamiess » Mon Feb 26, 2018 1:21 pm

Do you have any manual/documentation at all yet?
jamiess
Newbie
 
Posts: 0
Joined: Mon Feb 26, 2018 1:14 pm

Re: New PicoLog 6.0.14 Beta for testing

Postby Hitesh » Mon Feb 26, 2018 3:58 pm

Hi jamiess,

Please refer to our A to Z of Data acquisition and logging. This will be accessible via the software as well.

Regards,
Hitesh

Technical Support Engineer
Hitesh
Site Admin
Site Admin
 
Posts: 2765
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire

Re: New PicoLog 6.0.14 Beta for testing

Postby jamiess » Wed Feb 28, 2018 9:42 am

Thanks, I've been having some problems where there are periods with no measurements logged. Shall I reduce the frequency, or is it likely to be an issue with the logger hardware?
jamiess
Newbie
 
Posts: 0
Joined: Mon Feb 26, 2018 1:14 pm

Re: New PicoLog 6.0.14 Beta for testing

Postby Hitesh » Wed Feb 28, 2018 10:16 am

Hi jamiess,

Which device are you using and is it on a laptop or desktop? Which operating system are you using and are the power options set to turn off hard disks, send the PC to sleep or turn off USB ports?

Regards,
Hitesh

Technical Support Engineer
Hitesh
Site Admin
Site Admin
 
Posts: 2765
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire

Re: New PicoLog 6.0.14 Beta for testing

Postby jamiess » Wed Feb 28, 2018 1:41 pm

I was using the TC-08 with a plugged in laptop programmed never to go to sleep/hibernate etc. However, the harddrive was told to turn-off after 20 minutes (but I assume that is if nothing is being done on it) and the USB suspend function was enabled. I am turning both of these features off indefinitely, and updating to the stable picolog, so I will update you on how it works then!

I also had a DrDAQ plugged in that did some to disconnect permanently, unlike the TC-08 which just has data point gaps of a few minutes at a time.
jamiess
Newbie
 
Posts: 0
Joined: Mon Feb 26, 2018 1:14 pm


Return to PicoLog

Who is online

Users browsing this forum: No registered users and 1 guest