Test and Measurement Forum

Picoscope 2204A Overvoltage

Post any questions you may have about our current range of oscilloscopes

Picoscope 2204A Overvoltage

Postby underworldgamer » Mon Sep 15, 2014 4:34 pm

Hi members,

i have bought this oscilloscope and my first opinion, it is a very reliable testing device.

Is there a Transient Absorption Zener Diode or a Transient Voltage Suppressor Diode on channel A and B for overvoltage protection ? Or what kind of protection is used ?

Thanks

Mathias
underworldgamer
Newbie
 
Posts: 0
Joined: Mon Sep 15, 2014 10:29 am

Re: Picoscope 2204A Overvoltage

Postby Hitesh » Thu Sep 18, 2014 8:03 am

Hello Mathias,

The PicoScope 2204A is designed for low voltages on the inputs (max. 20V) so there is a resistor on each of the input channels to provide protection with secondary resistors further in the input circuit.

For voltages over 20V, we recommend the use of attentuation probes (and for safety/legal reasons, the use of active differential probes or some form of isolation for mains measurements).

Please do not exceed the input voltage range as you would risk blowing the input channels :(

Regards,
Hitesh

Technical Support Engineer
Hitesh
Site Admin
Site Admin
 
Posts: 2545
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire

Re: Picoscope 2204A Overvoltage

Postby Artur » Sat Dec 30, 2017 8:52 am

Hi

Please ensure me. Max Vpp voltage with probe 1x1 is 40v, and then for probe 1x10 is 400v?

Thanks
Artur
Newbie
 
Posts: 0
Joined: Sat Dec 30, 2017 8:44 am

Re: Picoscope 2204A Overvoltage

Postby Martyn » Sat Dec 30, 2017 9:54 am

With x1 probe you can measure -20V to +20V so 40V pk-pk, you can't measure 0V to 40V

With x10 probe -200V to +200V, please note that this does not allow you to measure mains voltages, unless using appropriate CAT rated probes.
Martyn
Technical Support Manager
Martyn
Site Admin
Site Admin
 
Posts: 2853
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Picoscope 2204A Overvoltage

Postby Artur » Sat Dec 30, 2017 11:52 am

Ok
Thank you, all clear.
Artur
Newbie
 
Posts: 0
Joined: Sat Dec 30, 2017 8:44 am


Return to USB PC Oscilloscopes

Who is online

Users browsing this forum: No registered users and 0 guests