Test and Measurement Forum

3405D Trigger Issues

Post your LabVIEW discussions here

3405D Trigger Issues

Postby Zuccj » Wed Dec 20, 2017 7:37 pm

I'm trying to set up the external trigger on a 3405D. I'm using the 3000aExampleBlock vi, and have included the advance triggering vi into it. What I would like to happen is on the trigger have it start capturing all four channels together. At the moment I have not been able to get the external trigger to work. When I run the VI it starts capturing data instantly, regardless of what the trigger settings are or even if I just leave the trigger disconnected.
Zuccj
Newbie
 
Posts: 1
Joined: Mon Nov 20, 2017 7:49 pm

Re: 3405D Trigger Issues

Postby Hitesh » Thu Dec 21, 2017 9:45 am

Hi Zuccj,

Please could you e-mail support@picotech.com advising what settings you are using (a modified example would be fine) and we can investigate further.

It would be helpful to know if the device still triggers if the auto trigger is set to 0.

Regards,
Hitesh

Technical Support Engineer
Hitesh
Site Admin
Site Admin
 
Posts: 2545
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire


Return to LabVIEW

Who is online

Users browsing this forum: No registered users and 1 guest