Latest version of Picoscope on Mac UI not responsive

dcseward · Post by **dcseward** » Thu Dec 14, 2017 8:06 pm

I am attempting to run Picoscope 6 on my Mac. I find the UI to be almost completely unresponsive. This will not work for me.

Any ideas on what I can do to improve things? I am running Mono version 4.0.4 (nothing else seems to work for my Mac). I am running the latest 6.11.13.2 picoscope on the Mac.

I have been completely unable to enable the second channel. I have been almost completely unable to do much of anything beyond fire up the tool and see that it is connecting to the hardware. I was able to change the voltage range once, but that was about it. Rebooting the software doesn't fix things. I tried to enable channel B, but to no avail. I was able to change the time division as well...But that has completely stopped working as well.

help!

Post by **Hitesh** » Fri Dec 15, 2017 10:28 am

Hi dcsweward,

Please try installing Mono Runtime 5.0.1.1.

We are in the process of testing a new version which addresses some issue. I'm not sure if this will be released prior to the Christmas break, but if not, it should be in early 2018.

Regards,

jeremy · Post by **jeremy** » Mon May 14, 2018 8:42 am

I am having this problem too with Mono 5.8.1.0 and picoscope 6.12.9.64. While running, the oscilloscope display shows fine, but clicking on buttons does nothing. If I stop the capture, everything works (until I start it again). Same problem with Mono 5.0.1.1.

I'm running macos 10.13.

Post by **Hitesh** » Mon May 14, 2018 10:09 am

Hi jeremy,

Which device are you using and is it specific buttons that are not responding?

Have you tried uninstalling and reinstalling the Mono Runtime?

Regards,

jeremy · Post by **jeremy** » Mon May 14, 2018 10:12 am

Hi Hitesh,

All buttons have the same issue. I'm using the picoscope 3406D MSO.

jeremy · Post by **jeremy** » Thu May 17, 2018 4:09 am

I should have added, yes, I have uninstalled and reinstalled multiple versions of mono.

Post by **Hitesh** » Mon May 21, 2018 10:10 am

Hi jeremy,

Would it be possible to post the trace.xml corresponding to your last session with the PicoScope 3406D MSO or e-mail it to support@picotech.com please?

Regards,

Test & Measurement Forum

Latest version of Picoscope on Mac UI not responsive

Latest version of Picoscope on Mac UI not responsive

Re: Latest version of Picoscope on Mac UI not responsive

Re: Latest version of Picoscope on Mac UI not responsive

Re: Latest version of Picoscope on Mac UI not responsive

Re: Latest version of Picoscope on Mac UI not responsive

Re: Latest version of Picoscope on Mac UI not responsive

Re: Latest version of Picoscope on Mac UI not responsive