Test and Measurement Forum

no signal generator button

Discussion forum for the new Picoscope Mac software

no signal generator button

Postby jlm » Tue Nov 28, 2017 4:53 pm

Hello
before buying picoscope 2205A MSO,
I installed on a mac high sierra the app picoscope beta 6.11.13.2
I want to visualize a logic analyzer domo with an analog signal
I also note the absence of the signal generator button
can you help me ?
thanks in advance
Attachments
Capture d’écran 2017-11-28 à 17.34.47.png
jlm
Newbie
 
Posts: 0
Joined: Tue Nov 28, 2017 4:19 pm

Re: no signal generator button

Postby Hitesh » Wed Nov 29, 2017 9:40 am

Hi jlm,

The issue has been fixed in an upcoming release of the software. Unfortunately, I am not able to advise on timescales at this moment in time.

If you do need to use the signal generator, I would suggest using a PC with PicoScope 6 on a Windows operating system for now.

Regards,
Hitesh

Technical Support Engineer
Hitesh
Site Admin
Site Admin
 
Posts: 2551
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire

Re: no signal generator button

Postby jlm » Wed Nov 29, 2017 6:05 pm

thank you for your reply
but what about viewing a demo with logical signals?

Regards,

JLM
jlm
Newbie
 
Posts: 0
Joined: Tue Nov 28, 2017 4:19 pm

Re: no signal generator button

Postby Hitesh » Thu Nov 30, 2017 9:23 am

Hi jlm,

Apologies, I misread your initial post :oops:

The signal generator will be available when you run the software with the PicoScope connected. At the present moment, we do not provide demonstration logical signals in demo mode.

If you wish to see some signals I might be able to provide a data file you can load in if you e-mail support@picotech.com

Regards,
Hitesh

Technical Support Engineer
Hitesh
Site Admin
Site Admin
 
Posts: 2551
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire


Return to PicoScope for Mac

Who is online

Users browsing this forum: No registered users and 2 guests