USB11/12 data logger - what is the maximum data?

Post any questions you may have about our current range of USB data loggers
Post Reply
usb11logger
Newbie
Posts: 1
Joined: Fri Dec 14, 2007 10:15 am

USB11/12 data logger - what is the maximum data?

Post by usb11logger »

Hello. What is the maximum number of data points that the USB11/12 data logger can store? What range of frequencies can it log at?

Thanks,

Dave.

ziko
Advanced User
Advanced User
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots

Post by ziko »

Hi and thank you for your post. The ADC11 does not have any memory within it. However you can sample at a maximum rate of 20kS/s. There are two modes of operation that the ADC11 can operate in ,

Realtime continious - less than or equal to 1KS/s for as long as you want.

Fast Block - Device runs as quick as it can for a very short period of time.

I would recommend reading this knowledge base FAQ:

http://www.picotech.com/support/kb/DataLoggers-kb193

Hope this helps.

Kind regards
Ziko

Technical Specialist

Post Reply