Exporting Data

Forum for discussing PicoScope (version 5)
Post Reply
Guest

Exporting Data

Post by Guest »

I'm trying to export data from Picoscope 5.15.4, using both the copy as text and save as text options, but in either case I only get one (the first I think) of the three channels recorded output along with the timebase. I have logged on channels A B and D. Please help.

PeterF
Advanced User
Advanced User
Posts: 435
Joined: Thu Jun 07, 2007 10:53 am
Location: Cambridgeshire

Post by PeterF »

.TXT files for scope windows
Column 1 is the time, usually in microseconds or nanoseconds. Column 2 is the voltage, in either millivolts or volts.

If there is more than one channel, the times and voltages for channel A appear first, then the times and voltages for channel B appear below, and so on. This is because readings for different channels may be collected at different times.

The same format is used when pasting scope data on the clipboard.

It would also be a good idea to upgrade to the latest version of PicoScope5, (R5.18.0), from the download page.
PeterF.

Post Reply