PicoScope 7 Software
Available on Windows, Mac and Linux
Picoscope6 w/ PicoScope 6403: Trigger on SENT?
-
HolgerNeumann
- Newbie
- Posts: 0
- Joined: Wed Sep 13, 2017 8:55 am
Picoscope6 w/ PicoScope 6403: Trigger on SENT?
Hello, i am using a 6403 Picoscope for SENT sensor evaluation.
Right now The triggers are limited to analog functions.
Is there an update planned for PicoScope6 software so i could trigger on
- Start of SENT fast channel message
- Start of SENT slow channel cycle
- Occurrence of slow channel (e.g. trigger on ID01)
- Masking FC1/FC2, e.g. "trigger if FC2 <= 2000"
- Masking slow channel (e.g. "ID01 not equal 0")
- CRC error on slow or fast channel
Currently i am using "PicoScope® 6 - PC Oscilloscope software version: 6.12.9.2917".
Are features like above planned for future releases?
Right now The triggers are limited to analog functions.
Is there an update planned for PicoScope6 software so i could trigger on
- Start of SENT fast channel message
- Start of SENT slow channel cycle
- Occurrence of slow channel (e.g. trigger on ID01)
- Masking FC1/FC2, e.g. "trigger if FC2 <= 2000"
- Masking slow channel (e.g. "ID01 not equal 0")
- CRC error on slow or fast channel
Currently i am using "PicoScope® 6 - PC Oscilloscope software version: 6.12.9.2917".
Are features like above planned for future releases?
-
Hitesh
Re: Picoscope6 w/ PicoScope 6403: Trigger on SENT?
Hi HolgerNeumann,
This feature is not presently in the software as the trigger event occurs based on the samples collected by the device. I have added your comment to an existing feature request.
Regards,
This feature is not presently in the software as the trigger event occurs based on the samples collected by the device. I have added your comment to an existing feature request.
Regards,