Test and Measurement Forum

Picoscope6 w/ PicoScope 6403: Trigger on SENT?

Forum for discussing PicoScope version 6 (non-automotive version)

Picoscope6 w/ PicoScope 6403: Trigger on SENT?

Postby HolgerNeumann » Wed Sep 13, 2017 9:09 am

Hello, i am using a 6403 Picoscope for SENT sensor evaluation.
Right now The triggers are limited to analog functions.
Is there an update planned for PicoScope6 software so i could trigger on
- Start of SENT fast channel message
- Start of SENT slow channel cycle
- Occurrence of slow channel (e.g. trigger on ID01)
- Masking FC1/FC2, e.g. "trigger if FC2 <= 2000"
- Masking slow channel (e.g. "ID01 not equal 0")
- CRC error on slow or fast channel
Currently i am using "PicoScope® 6 - PC Oscilloscope software version:".
Are features like above planned for future releases?
Posts: 0
Joined: Wed Sep 13, 2017 8:55 am

Re: Picoscope6 w/ PicoScope 6403: Trigger on SENT?

Postby Hitesh » Thu Sep 14, 2017 12:36 pm

Hi HolgerNeumann,

This feature is not presently in the software as the trigger event occurs based on the samples collected by the device. I have added your comment to an existing feature request.


Technical Support Engineer
Site Admin
Site Admin
Posts: 2748
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire

Return to PicoScope 6 for Windows

Who is online

Users browsing this forum: No registered users and 1 guest