Outputs on ADC-11

Post any questions you may have about our current range of USB data loggers
Post Reply
nick
User
User
Posts: 2
Joined: Fri Oct 26, 2007 9:31 am

Outputs on ADC-11

Post by nick »

The ADC-11 is spec'd with 2 outputs, but the terminal block (sold as compatible with ADC-11) only appears to have one output, and appears to ground the other. Am I missing something here? I need two outputs :)

ziko
Advanced User
Advanced User
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots

Post by ziko »

Hi and thank you for your post. The terminal board was designed when the Parallel Ported ADC11 was out, this only had one digital output. The USB ADC11 came long after the ADC11 with a few upgrades, the terminal has not changed since then. I will however put this through as a suggestion.

Kind regards
Ziko

Technical Specialist

nick
User
User
Posts: 2
Joined: Fri Oct 26, 2007 9:31 am

Post by nick »

Cool - thanks! We'll probably have to ditch the terminal block and hack up a parallel cable to get access to that second output then. We hope to be testing that in the next week or so. Thanks again!
Nick

Post Reply