Missing curve on saved measurement.

Post any questions you may have about our current range of oscilloscopes
Post Reply
hkurt
Newbie
Posts: 0
Joined: Sun Aug 27, 2017 5:43 pm

Missing curve on saved measurement.

Post by hkurt »

Hello.
First of all sorry for poor English...
I have a problem that is when i saved a measurement i did i found later when looking through them that there is missing signal between periods, probably the wrong name and i think it is called the buffer navigation toolbar.
For example when moving wrom window 15-16 of 32 i see the signal have dropped maybe 2 volts and it wont show on the window.
Anyone that have had this problem?
I will try to attach one of the files that this have happened to.
Thank you.
Attachments
Signal gløderele.psdata
(144.36 KiB) Downloaded 471 times

bennog
Advanced User
Advanced User
Posts: 206
Joined: Mon Nov 26, 2012 9:16 am
Location: Netherlands

Re: Missing curve on saved measurement.

Post by bennog »

Try using streaming mode at 5 sec per division and a buffer size of 500 ks or more as shown in the image.

Then you get about 50 sec of recording time and you can zoom in at the signal in greater level than your posted data file.

Benno
Attachments
2017-08-27 22-21-33.jpg

Post Reply