tc-08

Having problems ? let us know the details here
Post Reply
Guest

tc-08

Post by Guest »

im using 3 channels for temp & 1 channel for pressure through a transducer what is required help im STUCK.thank you

ziko
Advanced User
Advanced User
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots

Post by ziko »

Hi and thank you for your post.

Are you using the USB TC-08 or the serial TC-08. In any case the USBTC-08 has +/-60mV range on all the channels whilst the USB TC-08 has +/-70mV.

As long as the output of the pressure transducer is within the range of the TC-08 then you can measure it. Then using our software you can use the scaling option to convert the readings to your desired measurement.

Also in the software settings when selecting each channel, you have the option to choose all the various kinds of thermocouples. At the end of the selection you also have a mV settings, choose this for your pressure measurement.

Let me know how you get on, or if you have any further questions please do not hesitate to contact me.

Kind regards

Ziko
Ziko

Technical Specialist

Guest

TC-08 + pressure transducer

Post by Guest »

Do you have suggestions - places to purchase the pressure transducer to use with the TC-08?

ziko
Advanced User
Advanced User
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots

Post by ziko »

Hi I would recommend looking at RS or Farnell.

www.rswww.com
http://www.farnell.com/

Kind regards
Ziko

Technical Specialist

Post Reply