About the installation of the "hook" of the probe

Having problems ? let us know the details here
Post Reply
alkime
User
User
Posts: 5
Joined: Tue Sep 11, 2007 6:45 pm

About the installation of the "hook" of the probe

Post by alkime »

in the pico scope 2105.
There are small devices included .
I need some picture to see how to install the hook.
bes regards

ziko
Advanced User
Advanced User
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots

Post by ziko »

Hi I have attached two pictures, one showing before the connection and one showing after.

Hope this helps.

Kind regards
Attachments
After.JPG
After.JPG (16.32 KiB) Viewed 6126 times
point of placement.JPG
point of placement.JPG (17.64 KiB) Viewed 6137 times
Ziko

Technical Specialist

alkime
User
User
Posts: 5
Joined: Tue Sep 11, 2007 6:45 pm

My problem is the black piece.

Post by alkime »

Of the picture
and the silvered piece so.

now can I connect in the yellow conector or the PicoScope?
best regards
juan jose navarro.
Attachments
IMG_0116.JPG
IMG_0116.JPG (55.78 KiB) Viewed 6122 times

ziko
Advanced User
Advanced User
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots

Post by ziko »

The yellow plastic is there as protection when you are not using the scope. To connect other "hook" you must remove the yellow cover and insert the "hook"

Hope this helps.

Kind regards
Ziko

Technical Specialist

alkime
User
User
Posts: 5
Joined: Tue Sep 11, 2007 6:45 pm

Ok, ok

Post by alkime »

Thanks for all.

Best regards.
Juan Jose Navarro

Post Reply