help with an ADC10 and Labview8.2

Post your LabVIEW discussions here
Post Reply
iz3dmq_luca
Newbie
Posts: 1
Joined: Sun Aug 26, 2007 11:03 pm

help with an ADC10 and Labview8.2

Post by iz3dmq_luca »

Hello.
i 'm using an ADC10 LPT device , normally, with pico softwares.
i woul like to start to learn something about the use of this transducer with labview 8.2
i'm finding a gentleman that helps me to understand like interface the adc10 with a labview and if i need some particular drivers to work.

to start my experience i would like to duplicate a easy chart recorder for a temperature probe that i'm just using with pico-log-recorder who gives me a 0-5 vdc signal from 0 to 100 Celsius degrees .
someone can help me?
mny tks

gruntman
Advanced User
Advanced User
Posts: 109
Joined: Thu Sep 28, 2006 3:50 pm

Post by gruntman »

iz3dmq_luca,

The attached example will allow you to use the ADC-10 to log your temperature probe between 0-100C. If you have any questions feel free to ask...

Regards,

Richard Boyd
Crag Technologies, Inc
http://www.pc-oscilloscopes.com
Attachments
adc10_log_temp.vi
ADC-10 Labview 8.2 converted to measure between 0-100 C
(13.89 KiB) Downloaded 796 times

Post Reply