I'm Data Logger ADC-24 user.
It's being programed in VB.Net 2008, but Digital Input (1 to 4) is always in Hi (1).
It is.
Even hrdlcon.exe (hrdlcon.c) in 32Bit SDK (PicoSDK_32_10.6.10.22.exe) is the same result.
It can be read in accessory soft plw32.exe, so it isn't a breakdown of hardware.
What is bad?
VB.Net 2008
SDK PicoSDK_32_10.6.10.22.exe
PicoHRDL.dll 1.4.4.3
hrdlcon.exe Outputs
Opening devices.........
1: CU980/29
20: 0
Device opened successfully
1.4.0.205
USB 1.1
1
24
CU980/xx
22Jan16
PICOPP.SYS V1.13
Channel 1, 156mV range, single ended
Select an operation:
B - immediate block
W - windowed block
S - streaming
U - single readings
A - set analog channels
D - set digital channels
X - exit
Operation:
Set digital 1, direction input? (Y/N)
Set digital 2, direction input? (Y/N)
Set digital out 2, high? (Y/N)
Set digital 3, direction input? (Y/N)
Set digital out 3, high? (Y/N)
Set digital 4, direction input? (Y/N)
Set digital out 4, high? (Y/N)
Digital channels set.
Collect block immediate...
Press a key to start
Waiting for device to complete collection......
First 5 readings
Time 1234 Ch1
(ms) DO (mV)
0 1111 0.737682
61 1111 0.738800