FFT Window

Forum for discussing PicoScope version 6 (non-automotive version)
Post Reply
JohanvB
Newbie
Posts: 0
Joined: Tue May 02, 2017 1:00 pm

FFT Window

Post by JohanvB »

Hello,

Is there a possibilty to delete one window of the spectrum analysis in a range of windows, for example a start-up of a device, to become a better peak hold graph?

Thank you for the answer.

Gerry
PICO STAFF
PICO STAFF
Posts: 1145
Joined: Mon Aug 11, 2014 11:14 am

Re: FFT Window

Post by Gerry »

Hi JohanvB,

If I understand you correctly, you are capturing multiple buffers in Spectrum mode and using peak hold across the buffers which is getting distorted by an uncharacteristic waveform in the first window as a result of the signal captured immediately after the trigger point. So, you wanted to know if you could somehow reject the first waveform from the Peak hold calculation.

Unfortunately, there is no current way to do this in our software.

Regards,

Gerry
Gerry
Technical Specialist

JohanvB
Newbie
Posts: 0
Joined: Tue May 02, 2017 1:00 pm

Re: FFT Window

Post by JohanvB »

Thank you Gerry. I have been searching and didn't find it eather.

Post Reply