PicoScope 7 Software
Available on Windows, Mac and Linux
Low output voltage AWG Picoscope 3203D
-
MalcolmCaemmerer
- Newbie
- Posts: 0
- Joined: Wed May 03, 2017 7:37 am
Low output voltage AWG Picoscope 3203D
Hi,
I'm also showing a low voltage from the signal generator. The goal was to generate a 200µs pulse from 0V to 1V. I used an amplitude of 1V and offset of 1V but I'm only showing an output of about 200mV as shown. I've attached the pssettings file that I'm using with a 3203D.
I also found that when I set the amplitude to 2V without an offset, that I show the expected output of 2V.
Thanks for your help,
Malcolm
I'm also showing a low voltage from the signal generator. The goal was to generate a 200µs pulse from 0V to 1V. I used an amplitude of 1V and offset of 1V but I'm only showing an output of about 200mV as shown. I've attached the pssettings file that I'm using with a 3203D.
I also found that when I set the amplitude to 2V without an offset, that I show the expected output of 2V.
Thanks for your help,
Malcolm
- Attachments
-
- 200micropulse.pssettings
- (113.68 KiB) Downloaded 629 times