Picoscope 4444 D9 pinout

Post any questions you may have about our current range of oscilloscopes
Post Reply
bennog
Active User
Active User
Posts: 33
Joined: Mon Nov 26, 2012 9:16 am
Location: Netherlands

Picoscope 4444 D9 pinout

Post by bennog » Mon Apr 24, 2017 5:42 am

Where can I find some info on the D9 connector of the 4444 PicoScope ?
Witch pin is used for what. And how the auto detecton of the probe works e.g. (1:1 1:10 1:25) or (V or A)

Benno
Top
Martyn
Site Admin
Site Admin
Posts: 3345
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Picoscope 4444 D9 pinout

Post by Martyn » Mon Apr 24, 2017 10:07 am

We haven't detailed the 9 way connector pinouts, or the autodetection mechanism.

To use third party probes you will need to use the 9 way to BNC adaptors. It is still possible to create custom probes within the PicoScope 6 software to correctly display the measured values.
Martyn
Technical Support Manager
Top
bennog
Active User
Active User
Posts: 33
Joined: Mon Nov 26, 2012 9:16 am
Location: Netherlands

Re: Picoscope 4444 D9 pinout

Post by bennog » Tue Apr 25, 2017 3:24 pm

Ok i figured it out :D
pin 1 = diff+
pin 2 = diff-
pin 6 = GND

Benno
Top
Post Reply

Return to “USB PC Oscilloscopes”