Need help with USB decoding

Forum for discussing PicoScope version 6 (non-automotive version)
Post Reply
spaceotter
Newbie
Posts: 0
Joined: Wed Mar 29, 2017 7:16 pm

Need help with USB decoding

Post by spaceotter »

I've tried the latest stable and beta version, and the USB FS decoding only decodes the the first 1-4 packets from my test device. I told it to decode between the rulers, and by adjusting them it seems to be able to decode the packets in the middle, but only the first 1-4 after the ruler at a time. I have both D+ and D- connected and the signals look fine. The sample rate is 250MS/s. What could be the issue?

Martyn
Site Admin
Site Admin
Posts: 4491
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Need help with USB decoding

Post by Martyn »

Can you post a psdata file, either here, or directly to the support team via email support@picotech.com
Martyn
Technical Support Manager

Post Reply